用rpi-update轻松实现firmware更新!

rpi-update是老外开发的一个更新树莓派firmware的工具,很方便也很好用,推荐给大家!
红色部分是需要输入的:
$ sudo apt-get update
$ sudo apt-get install ca-certificates
$ sudo apt-get install git-core
$ sudo wget http://goo.gl/1BOfJ -O /usr/bin/rpi-update
$ sudo chmod +x /usr/bin/rpi-update
$ sudo rpi-update
Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS
Performing self-update
Autodetecting memory split
Using ARM/GPU memory split of 192MB/64MB
We’re running for the first time
Setting up firmware (this will take a few minutes)
Using SoftFP libraries
/opt/vc/sbin/vcfiled: error while loading shared libraries:libvchiq_arm.so: cannot open shared object file: No such file or directory
If no errors appeared, your firmware was successfully setup
A reboot is needed to activate the new firmware
$ sudo ldconfig
$ sudo rpi-update
Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS
Performing self-update
Autodetecting memory split
Using ARM/GPU memory split of 192MB/64MB
Updating firmware (this will take a few minutes)
Your firmware is already up to date
$ sudo reboot
备注:
09-18版本以后的官方镜像都集成了rpi-update工具,直接执行“sudo rpi-update”就行了,不需要再安装

未经允许不得转载:树莓派 » 用rpi-update轻松实现firmware更新!

赞 (0)
分享到:更多 ()

评论 0

评论前必须登录!

登陆 注册